SDK / exoplayer

#minor-release

PiperOrigin-RevId: 452282128
(cherry picked from commit 2441bc69)

This is done by removing the `@FieldNumber` IntDef completely. It's not
really adding much value anyway, because it's `open` so there's no real
enforcement to prevent passing 'incorrect' values.

#minor-release

PiperOrigin-RevId: 452108972
(cherry picked from commit 97210b5a)

#minor-release

PiperOrigin-RevId: 452043577
(cherry picked from commit c3866449)

This should fix running `./gradlew clean test` if MediaPipe hasn't been built, for example.

PiperOrigin-RevId: 452033698
(cherry picked from commit 14ed32c6)

This reinstates the permissive behaviour removed by
https://github.com/google/ExoPlayer/commit/fe7e5b8181333683fda7869c3d9cffc0bdefcccb

Test file created by opening bear.opus in a hex editor and naively
duplicating the two header packets, starting at (and including) the
first `OggS` in the file and ending just before the third `OggS`.

#minor-release

Issue: google/ExoPlayer#10038
PiperOrigin-RevId: 452015662
(cherry picked from commit b6b28267)

#minor-release

PiperOrigin-RevId: 452006137
(cherry picked from commit 5460ac8e)

#minor-release

PiperOrigin-RevId: 452002758
(cherry picked from commit f76baaee)

This ensures the 'use X instead' message is easily visible in the
generated HTML for the overriding method. Currently it's not, e.g.:
https://exoplayer.dev/doc/reference/com/google/android/exoplayer2/BasePlayer.html#getCurrentWindowIndex()

#minor-release

PiperOrigin-RevId: 452002224
(cherry picked from commit d711dee0)

PiperOrigin-RevId: 451994696
(cherry picked from commit 1c5032e1)

The current verion of AGP warns it doesn't support Android API 32 [1].

The wrapper was upgraded with ([instructions](https://docs.gradle.org/current/userguide/gradle_wrapper.html#sec:upgrading_wrapper)):
```shell
$ ./gradlew wrapper --gradle-version 7.4.2 --distribution-type all
```

[1]
```
WARNING:We recommend using a newer Android Gradle plugin to use compileSdk = 32

This Android Gradle plugin (7.0.3) was tested up to compileSdk = 31

This warning can be suppressed by adding
    android.suppressUnsupportedCompileSdk=32
    to this project's gradle.properties

    The build will continue, but you are strongly encouraged to update your project to
    use a newer Android Gradle Plugin that has been tested with compileSdk = 32
```

#minor-release

PiperOrigin-RevId: 451893214
(cherry picked from commit 7fc9bb9c)

Gives a bit more information upon failures

PiperOrigin-RevId: 451882968

Add bitrate check to the "can encode" criteria.

PiperOrigin-RevId: 451868042

This value only existed to allow setting media URLs from external sources
(e.g. in a MediaController) so that a player can start playing this item.
Now that we have MediaItem.RequestMetadata.mediaUrl we can remove this value
from MediaMetadata because it's request metadata, not media metadata.

PiperOrigin-RevId: 451857413

These fields can be used to transport additional request properties
when the requester doesn't know the details needed for the actual
playback (i.e. the LocalConfiguration).

PiperOrigin-RevId: 451857093

ExoPlayer applies a large time offset to buffers so that, if the input has negative timestamps, generally buffers seen by the decoders should have positive timestamps. Modify how the offset is handled in `Transformer` so that decoders and encoders generally see positive timestamps, by leaving the offset on samples when reading them in the base renderer (remove the code that removed the offset), and then removing the offset when muxing. Also update the frame processor chain and slow motion flattening code to retain the existing behavior after this change (these both need original media presentation timestamps)

Tested via existing end-to-end tests and manually verified that the overlay frame processor shows the expected original media timestamps.

Aside: we don't need the same logic as ExoPlayer to track stream offsets across the decoder yet, because we don't try to handle stream changes during playback in single asset editing. (There is an edge case of multi-period DASH that may not work but I doubt anyone will use that as input to `Transformer` before we change the code to handle multi-asset properly.) In future we should try to refactor interaction with the decoder to use the same code for Transformer and ExoPlayer.
PiperOrigin-RevId: 451846055

PiperOrigin-RevId: 451831531

PiperOrigin-RevId: 451428202

Most devices won't support 8k decoding, so they'll skip this test entirely.

As the video is quite short, this test shouldn't be any longer than the nearby,
long-running 4k60 test.

PiperOrigin-RevId: 451423368

PiperOrigin-RevId: 451392021

PiperOrigin-RevId: 451384408

Unconditionally sleep for offload, if the audio buffer is full.
Previously ExoPlayer would not sleep if the expected wake-up was
in 2s. This was to prevent underrun if the wake-up was delayed.

Experiments have shown that the wakup audio buffer is far more
than 2s (around 1min). Additionally,
the metric was incorrect because it measured both,
AudioTrack + DSP.

Finally, this metric was erroneous after a gapless transition,
when the head position would reset to 0 and thus the computed
delay until next wakeup was too large.

PiperOrigin-RevId: 451383701

PiperOrigin-RevId: 451380267

PiperOrigin-RevId: 451371681

SSIM calculation requires the input and output dimensions to be identical.

For devices that can't encode the input dimensions, skip SSIM calculations and
log the cause. Only apply this on tests where the encoder may not support the
input file dimensions.

PiperOrigin-RevId: 451364904

Decode-only video frames (needed when the frame at / first frame after the
clipping start is not a key frame) need to be decoded but not passed to
the frame processor chain or encoder.

The clipping start offset needs to be removed from the frame timestamps
in the passthrough and video pipelines.
There are no changes needed for this in the audio pipeline, as it doesn't
use the input timestamps -- it uses its own timestamps derived from the
buffer sizes instead.

Also add demo option to try this out.

#minor-release

PiperOrigin-RevId: 451353609

There's no need to manually construct a 'default'
DefaultDataSource.Factory instance, we can just pass the `Context` to
`DefaultMediaSourceFactory` and let it construct the
`DefaultDataSource.Factory` internally.

PiperOrigin-RevId: 451155747

PiperOrigin-RevId: 451142799

Also update names of implementations to match design doc.
In follow-ups, SingleFrameGlTextureProcessor will become
an abstract implementation of a new GlTextureProcessor
interface.

Texture processor makes sense as it processes OpenGL textures.
The term frame processor will be used for something else in
follow-ups.

PiperOrigin-RevId: 451142085

PiperOrigin-RevId: 451135097

* Rename (via deprecation)
  `MediaItem.DrmConfiguration.Builder#forceSessionsForAudioAndVideoTracks`
  to `setForceSessionsForAudioAndVideoTracks`. This is more consistent
  with existing 'force' method names both in this class and in
  `TrackSelectionParameters.Builder`.
* Add missing `@Nullable` annotation to the parameter for
  `MediaItem.SubtitleConfiguration.Builder#setMimeType`. This annotation
  is already present on the `MediaItem.SubtitleConfiguration#mimeType`
  field that this setter corresponds to.

PiperOrigin-RevId: 450941336

There is a problem with the ImageReader formats used by the
SSIM helper that only occurs for Nexus 5 API 21, so as a workaround
we can skip the SSIM calculation on Nexus 5 API 21.

This skips just the SSIM calculation (by setting the value to
1.0 instead and logging). The tests still run when SSIM is skipped
so that we can detect other failures.

PiperOrigin-RevId: 450903183

Decoding and encoding 320x240 H264 video should be supported
on all devices from Android 5.0 based on CDD requirements.
https://source.android.com/compatibility/5.0/android-5.0-cdd#5_2_video_encoding

640x360 encoding doesn't seem to be supported on Nexus 5.

PiperOrigin-RevId: 450901715

This value is only needed by subclasses of `Rating`, all of which are
in this package (the `Rating` constructor is already package-private to
ensure this).

PiperOrigin-RevId: 450886872

4K decoding is not supported (not required to be supported) on all
devices, e.g., Nexus 5 does not support it.

PiperOrigin-RevId: 450682519

PiperOrigin-RevId: 450643824

Recreating an EGLSurface for a surface that already has an
EGLSurface is not allowed according to the
[documentation](https://www.khronos.org/registry/EGL/sdk/docs/man/html/eglCreatePlatformWindowSurface.xhtml).

This fix was tested on the devices listed in the bug
description (Pixel 5a, Nexus 5).

PiperOrigin-RevId: 450473569

*** Original commit ***

Rollback of https://github.com/google/ExoPlayer/commit/57182ac7bd32db54d11fd41e21338a2bbfaf043c

*** Original commit ***

Remove `@Nullable` from `MediaSource.Factory` setters

The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default imple...

***

PiperOrigin-RevId: 450453325

AudioTrack.setOffloadEndOfStream should be called after a track
has been buffered. Additionally, the AudioTrack must be playing.

It has been observed that for very short media (<1s), the AudioTrack
might not have started immediately after the read that buffered
the audio.

In such a situation, calling AudioTrack.setOffloadEndOfStream throws
and playback fails.

Avoid this failure by checking that the AudioTrack is playing before
calling setOffloadEndOfStream.

This means that very short gapless media will not be gapless, this was
deemed acceptable given that such very short media should be very rare
in offload.

PiperOrigin-RevId: 450431146

Issue: google/ExoPlayer#9897
Issue: google/ExoPlayer#10268

#minor-release

PiperOrigin-RevId: 450428520