SDK / exoplayer

PiperOrigin-RevId: 469143613

PiperOrigin-RevId: 468672505

PiperOrigin-RevId: 468670096

Issue: androidx/media#142
PiperOrigin-RevId: 468666737

Upstream timestamps from the decoder are also in microseconds,
so using microseconds here is consistent with that.

PiperOrigin-RevId: 468659099

Remove the manual overwriting of Note ON events that have 0 velocity with Note OFF. JSyn handles this already.

- The implementation of "running status" means that the amount of bytes read from the file differ from the size of the sample that ends up in the decoder. The decoder sample contains the applied running status (status of previous event), which the file bytes don't contain.

PiperOrigin-RevId: 468537659

Adds a method to FrameProcessor.Listener to be called when an
output frame is available and a method releaseOutputFrame in
FrameProcessor allowing the caller to trigger release of the
oldest available output frame at a given timestamp. Late frames
or frames with unset release times are dropped in the
FinalMatrixTransformationProcessorWrapper.

More than one output frame can become available before they are
released if the penultimate GlTextureProcessor is capable of producing
multiple output frames. Processing continues while waiting for
releaseOutputFrame to be called. Frame release tasks are prioritized
over other tasks.

PiperOrigin-RevId: 468473072

Manually tested using transformer demo HLG videos. Before this CL, RGB values after the YUV to RGB conversion reached up to 1.025. After this CL, RGB values correctly clamp at 1.0.

PiperOrigin-RevId: 468426092

PiperOrigin-RevId: 468257769

FrameProcessingTaskExecutor should be released on error.
There can be a delay until this happens, so
FrameProcessingTaskExecutor will cancel any pending tasks
and drop new tasks until it is released.

PiperOrigin-RevId: 468171820

PiperOrigin-RevId: 468152718

PiperOrigin-RevId: 468013019

We create an empty CueGroup in many places as default or
where none is needed. Instead, we can define a constant
for this purpose and reuse it.

PiperOrigin-RevId: 467944841

PiperOrigin-RevId: 467910378

This is needed as a pre-requisite for allowing MCVR to control
FrameProcessor frame release for previewing.

Submitting a high-priority task is conceptually different from
posting at the front of a single queue of tasks, as the high-priority
tasks are executed in FIFO order among themselves. This will ensure
that frame release tasks submitted in close succession are executed
in the order they are submitted but before any lower priority tasks.

PiperOrigin-RevId: 467675137

Increase the estimated max sample size for HEVC by 2x, and set a minimum
size of 2MB. The 2MB will be applied for resolutions up to 1080p, after
which the new calculation takes effect. This is in par with the
platform's HEVC software decoder.

PiperOrigin-RevId: 467641494

The specified CMake version doesn't work with the latest
Android Studio releases. Updating to a more recent version
fixes the problem.

Issue: google/ExoPlayer#9933
PiperOrigin-RevId: 467634063

This base class will simplify the implementation of custom
Player classes. The current version only supports
available commands and playWhenReady handling.

PiperOrigin-RevId: 467618021

PiperOrigin-RevId: 467610621

When the player finishes playback and reaches the STATE_ENDED,
the notification remains visible with a pause button and the
service is kept in the foreground. This is a bug.

With this change, when the player reaches the STATE_ENDED, the
service is stopped from the foreground and a notification is shown
with a play button. If the play icon is tapped, the player will restart
playback of the last played item. Playing the last played item again
is the existing behavior when play/pause commands are received from
the legacy MediaSession (e.g. BT headset buttons).

#minor-release

Issue: google/ExoPlayer#112
PiperOrigin-RevId: 467231509

* Rename all Rgba instances to Rgb.
* Remove alpha value from the RGBA Matrices and apply the 4x4 matrix
only to the R, G, B channels.
* Restore the alpha from the input unchanged.

PiperOrigin-RevId: 467208888

This change adds ExternalTextureManager which implements
InputListener to only queue input frames to the
ExternalTextureProcessor when it is ready to accept an input
frame. This replaces the old retry-logic in GlEffectsFrameProcessor.

Before this change, the retrying in GlEffectFrameProcessor wasted
CPU time if input becomes available faster than the
ExternalTextureProcessor can process it.

PiperOrigin-RevId: 467177659

From NDK 23.1.7779620 and above, the arm64-v8a ABI needs additional
build flags to correctly link the ffmpeg libraries.

Issue: google/ExoPlayer#9933
PiperOrigin-RevId: 467161973

In some cases, the IMA SDK fails to call the expected loadAd
event to load the next ad to play. This is (potentially) the
only remaining case where playback can get stuck due to missing
calls from IMA as the player doesn't even have a MediaSource at
this stage and is only waiting for IMA to provide the ad URL.

We can reuse the existing adPreloadTimeoutMs that was added for
a similar purpose (when preloading the first ad in the group).
The JavaDoc matches this purpose as well and the default timeout
is appropriate since we expect to get the loadAd call immediately.

Issue: google/ExoPlayer#10510
PiperOrigin-RevId: 466953617

PiperOrigin-RevId: 466735554

createSupportedTransformationRequest is more accurate than
createFallbackTransformationRequest, as a TransformationRequest will be returned
regardless of whether any fallback is applied.

PiperOrigin-RevId: 466641277

This change adds a new method onReadyToAcceptInputFrame to
GlTextureProcesssor.InputListener and changes maybeQueueInputFrame
to queueInputFrame, removing the boolean return value.
This avoids the re-trying in ChainingGlTextureProcessorListener
by allowing it to only feed frames from the producing to the consuming
GlTextureProcessor when there is capacity.

MediaPipeProcessor still needs re-trying when processing isn't 1:1.

PiperOrigin-RevId: 466626369

Previously, this feature interpreted SDR signals as HDR when called. Now, only HDR
streams are interpreted as HDR, so the javadoc should be updated. Not yet removing
this method, as there are still some loose ends to finish up (ex. PQ support, e2e
tests).

PiperOrigin-RevId: 466425738

Without this permission, files in `/sdcard` or other directories cannot be read by the demo, as they're not in the transformer demo's scoped storage container.

For more information, see https://developer.android.com/training/data-storage/use-cases

Tested by uninstalling and re-installing the demo app, granting permission by
starting a transformation, and launching an intent using a local file in `/sdcard`
to start another transformation. Without this CL, this threw an error, and with
this CL it succeeded.

PiperOrigin-RevId: 466399023

PiperOrigin-RevId: 466370644

PiperOrigin-RevId: 466324322

While HDR is most closely tied to the color transfer (ex.
COLOR_TRANSFER_SDR is the only one explicitly mentioning dynamic
range), technically color spaces may be associated with HDR as well,
like BT.2020 commonly being used for HDR rather than BT.709 for SDR.

Therefore, it's more specific to mention just that the transfer is HDR.

PiperOrigin-RevId: 466316960

This simplifies ChainingGlTextureProcessor as it now only connects a
consuming and a producing GlTextureProcessor rather than a previous,
current, and next GlTextureProcessor.

Also use default no-op implementations of the listeners in
SingleFrameGlTextureProcessor and MediaPipeProcessor to avoid
null-checks.

PiperOrigin-RevId: 466301642

This allows the GlEffectsFrameProcessor to later handle HLG and PQ
differently, or limited and full color range differently.

No functional change intended in this CL.

PiperOrigin-RevId: 466070764

PiperOrigin-RevId: 466032455

PiperOrigin-RevId: 466025324

PiperOrigin-RevId: 466018462

Revert "DefaultMediaNotificationProvider: Fix missing comma in documentation."

DefaultMediaNotificationProvider: Fix missing comma in documentation.