SDK / exoplayer

`contentTitle` and `contentText` can now be overridden.

Issue: androidx/media#150
PiperOrigin-RevId: 471287701

* Non-standard parameter comment; prefer `/* paramName= */ arg`
  (see http://go/bugpattern/ParameterComment) (3 times)

This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.

This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.

#codehealth

Tested:
    Local presubmit tests passed.
PiperOrigin-RevId: 471198016

PiperOrigin-RevId: 471137219

In particular, make it a bit more clear that "rendering" and "releasing" frames are
related concepts, and how they differ from one another in conjunction with frame
dropping.

PiperOrigin-RevId: 471037733

Separate MatrixTransformationProcessor constructors by color input and output.

PiperOrigin-RevId: 471034768

* Non-standard parameter comment; prefer `/* paramName= */ arg`
  (see http://go/bugpattern/ParameterComment) (19 times)

This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.

This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.

#codehealth

Tested:
    Local presubmit tests passed.
PiperOrigin-RevId: 471022923

PiperOrigin-RevId: 471017440

PiperOrigin-RevId: 471008623

#minor-release

PiperOrigin-RevId: 470999044

* Non-standard parameter comment; prefer `/* paramName= */ arg`
  (see http://go/bugpattern/ParameterComment)

This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.

This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.

#codehealth

Tested:
    Local presubmit tests passed.
PiperOrigin-RevId: 470953422

This should now expect transformation to succeed.

PiperOrigin-RevId: 470950411

PiperOrigin-RevId: 470354448

TL;DR: we should check if there are new frames available to queue to the
ExternalTextureProcessor before actually queueing a frame.

The overall flow on the external texture processor:

- `SurfaceTexture.onFrameAvailable` is called on `ExtTexMgr`, and
  - it calls `updateTexImage()`, and sets `frame`
  - it calls `maybeQueueFrameToExtTexProc()`
    - the frame is queued to `ExtTexProc` if `frame` is set

  - From `ExtTexProc.queueInputFrame()`:
    - notifies the `frameProcessorListener` of available frame
    - notifies the `inputListener` of `onReadyToAcceptInputFrame`
      - (`ExtTexMgr` is the listener), it calls `maybeQueueFrameToExtTexProc()`
       again

-- Parallelly --
- `ExtTexProc` calls `inputListener.onInputFrameProcessed`, when the frame is
released
  - (`ExtTexMgr` is the listener), sets `frame` to `null`

*Problem*

This logic relies on `frame` to be cleared at the right time.

In transformer, it's OK b/c `ExtTexProc` release the frame immediately in
`queueInputFrame()` and calls `onInputFrameProcessed` which also reset `frame`

But in previewing, the frame is not released for a while, up to 10 ms.
In this case, `frame` will not reset in this 10 ms, and
`maybeQueueFrameToExtTexProc()` is repeatedly queueing the same input frame.

PiperOrigin-RevId: 470211620

Native multidex can only be used for binaries with minSdkVersion of 21 or higher, but minSdkVersion was specified to 16.

PiperOrigin-RevId: 470004102

Native multidex can only be used for binaries with minSdkVersion of 21 or higher, but minSdkVersion was specified to 16.

PiperOrigin-RevId: 470003836

Remove unecessary null checks.

PiperOrigin-RevId: 469999952

PiperOrigin-RevId: 469959215

PiperOrigin-RevId: 469750922

Use the PQ OETF and EOTF to ensure that intermediate fragment shader operations
using PQ are in linear BT.2020 rather than PQ and HLG-1 BT.2020.

Also, swap the OETF and EOTF in shaders, as they were used incorrectly before

Manually tested by verifying transformer demo HLG and PQ videos look the same with and without this CL, including with a BitmapOverlayProcessor enabled to test flows both with one MatrixTransformationProcessor that skips HDR TFs, and with one that doesn't.

PiperOrigin-RevId: 469736067

PiperOrigin-RevId: 469443086

PiperOrigin-RevId: 469438747

`android_binary` is only required when building an application.

PiperOrigin-RevId: 469413752

PiperOrigin-RevId: 469410221

PiperOrigin-RevId: 469143613

PiperOrigin-RevId: 468672505

PiperOrigin-RevId: 468670096

Issue: androidx/media#142
PiperOrigin-RevId: 468666737

Upstream timestamps from the decoder are also in microseconds,
so using microseconds here is consistent with that.

PiperOrigin-RevId: 468659099

Remove the manual overwriting of Note ON events that have 0 velocity with Note OFF. JSyn handles this already.

- The implementation of "running status" means that the amount of bytes read from the file differ from the size of the sample that ends up in the decoder. The decoder sample contains the applied running status (status of previous event), which the file bytes don't contain.

PiperOrigin-RevId: 468537659

Adds a method to FrameProcessor.Listener to be called when an
output frame is available and a method releaseOutputFrame in
FrameProcessor allowing the caller to trigger release of the
oldest available output frame at a given timestamp. Late frames
or frames with unset release times are dropped in the
FinalMatrixTransformationProcessorWrapper.

More than one output frame can become available before they are
released if the penultimate GlTextureProcessor is capable of producing
multiple output frames. Processing continues while waiting for
releaseOutputFrame to be called. Frame release tasks are prioritized
over other tasks.

PiperOrigin-RevId: 468473072

Manually tested using transformer demo HLG videos. Before this CL, RGB values after the YUV to RGB conversion reached up to 1.025. After this CL, RGB values correctly clamp at 1.0.

PiperOrigin-RevId: 468426092

PiperOrigin-RevId: 468257769

FrameProcessingTaskExecutor should be released on error.
There can be a delay until this happens, so
FrameProcessingTaskExecutor will cancel any pending tasks
and drop new tasks until it is released.

PiperOrigin-RevId: 468171820

PiperOrigin-RevId: 468152718

PiperOrigin-RevId: 468013019

We create an empty CueGroup in many places as default or
where none is needed. Instead, we can define a constant
for this purpose and reuse it.

PiperOrigin-RevId: 467944841

PiperOrigin-RevId: 467910378

This is needed as a pre-requisite for allowing MCVR to control
FrameProcessor frame release for previewing.

Submitting a high-priority task is conceptually different from
posting at the front of a single queue of tasks, as the high-priority
tasks are executed in FIFO order among themselves. This will ensure
that frame release tasks submitted in close succession are executed
in the order they are submitted but before any lower priority tasks.

PiperOrigin-RevId: 467675137

Increase the estimated max sample size for HEVC by 2x, and set a minimum
size of 2MB. The 2MB will be applied for resolutions up to 1080p, after
which the new calculation takes effect. This is in par with the
platform's HEVC software decoder.

PiperOrigin-RevId: 467641494

The specified CMake version doesn't work with the latest
Android Studio releases. Updating to a more recent version
fixes the problem.

Issue: google/ExoPlayer#9933
PiperOrigin-RevId: 467634063