SDK / exoplayer

#minor-release

PiperOrigin-RevId: 513501046

#minor-release

PiperOrigin-RevId: 513488487

PiperOrigin-RevId: 513483809

PiperOrigin-RevId: 513289716

Used an actual captured image with set color profile for test to minimise the chance of the test flaking. Also renamed the media/bitmap/overlay folder to media/bitmap/input_images for clarity.

PiperOrigin-RevId: 513273353

If the Metadata passed to SegmentSpeedProvider is null, then the
SegmentSpeedProvider will always return 1f from getSpeed.

Initializing a SpeedChangingAudioProcessor requires a SpeedProvider.
Once configured,this audioProcessor is always active, so buffers are
passed through it. Because getSpeed is always 1, the processor performs
a no-op, but still has to do a buffer copy for each buffer.

By not initializing the audio processor when metadata is null, this
copy can be skipped and the audio pipeline is more performant.

Note: This change does not affect the multiple media-item case, which
is not supported with speed changes, as per Transformer API
documentation.
PiperOrigin-RevId: 513261811

Changes include:
1. Move the test fine into muxer module.
2. Use dump file infra for test cases.
3. Add one additional test for adding float metadata.
4. Few improvements in the code.

In next CL will remove Mp4 term from the file name as we are not using this term in test file names.

PiperOrigin-RevId: 513222506

PiperOrigin-RevId: 513213229

PiperOrigin-RevId: 513186205

These are not supported by Dackka

#minor-release

PiperOrigin-RevId: 513176533

We shouldn't have this logging unless we really need it to debug
a specific problem, as it can be noisy (even at debug level).

PiperOrigin-RevId: 512904412

Reference docs are now generated by the standard Jetpack machinery, so there's no need for us to generate these docs ourselves.

PiperOrigin-RevId: 512898248

#minor-release

PiperOrigin-RevId: 512897269

#minor-release

PiperOrigin-RevId: 512890813

This lays the groundwork for full multi-asset, and more particularly for
adding looping background audio.

PiperOrigin-RevId: 512887888

Once the value returned from AudioTimestampPoller advances, we
only need getPlaybackHeadPosition to sample sync params and
verify the returned timestamp. Both of these happen less often
and we can avoid calling getPlaybackHeadPosition if we don't
actually need it.

PiperOrigin-RevId: 512882170

Based on 1000 test runs an emulator, with the current timeout releasing
fails (even with no custom effects) about one percent of the time.
Releasing normally completes in about 30 ms but occasionally
`eglTerminate` took up to 200 ms (and even releasing an effect
took up to 80 ms in one case).

With the new timeout of 500 ms, we still catch stuck effects reasonably
quickly but the number of flaky test failures should be less than one in
ten thousand.

PiperOrigin-RevId: 512690715

This timeline will be used in unit test cases of follow-up
CLs. It basically can be used to emulate the timeline created by a
multi-period live media source when the real time advances.

PiperOrigin-RevId: 512665552

PiperOrigin-RevId: 512659747

Playback parameter signalling can be quite complex because
 (a) the renderer clock often has a delay before it realizes
     that it doesn't support a previously set speed and
 (b) the speed set on media clock sometimes intentionally
     differs from the one surfaced to the user, e.g. during
     live speed adjustment or when overriding ad playback
     speed to 1.0f.

This change fixes two problems related to this signalling:
 1. When resetting the media clock speed at a period transition,
    we don't currently tell the renderers that this happened.
 2. When a delayed speed change update from the media clock is
    pending and the renderer for this media clock is disabled
    before the change can be handled, the pending update becomes
    stale but it still applied later and overrides any other valid
    speed set in the meantime.

Both edge cases are also covered by extended or new player tests.

Issue: google/ExoPlayer#10882

#minor-release

PiperOrigin-RevId: 512658918

Following test cases are added:
1. Mux H264 video
2. Mux H265 video
3. Mux HDR video

Each test case performs following actions:
1. Extract track and samples from input Mp4 using MediaExtractor.
2. Feed those samples into Mp4 muxer.
3. Use extractor to extract the samples from muxed file and create dump file.

PiperOrigin-RevId: 512589069

MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
 1. Detection of the last output buffer of the old stream to trigger
    onProcessedStreamChange and setting the new output stream offset.
 2. Detection of the first input buffer of the new stream to trigger
    onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
  A. (1) happens after (2). This may happen if the declared media
     duration is shorter than the actual last sample timestamp.
  B. (2) is too late and there are output samples between (1) and (2).
     This can happen if the new media outputs samples with a timestamp
     less than the first input timestamp.

This can be made more robust by:
 - Keeping a separate formatQueue for each stream to avoid case A.
 - Force outputting the first format after a stream change to
   avoid case B.

Issue: google/ExoPlayer#8594

#minor-release

PiperOrigin-RevId: 512586838

Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.

Issue: google/ExoPlayer#10898

#minor-release

PiperOrigin-RevId: 512580395

The output info for a new stream is marked pending until the last
sample of the previous stream has been processed. However, this fails
if the previous stream has already been fully processed. We need to
detect this case explicitly to avoid signalling the output change one
sample too late.

#minor-release

PiperOrigin-RevId: 512572854

This test became flaky after https://github.com/androidx/media/commit/ab7e84fb34b7ef4b13e492e1f8918345c712ec30 because some of the
unrealistic frame times ended up on the same release time.

Using realistic numbers avoids the flakiness.

PiperOrigin-RevId: 512566469

Uses the first mediaItem's format as the output format.

If there is `Presentation` supplied in the `Composition.effects`, add it as the
last effect of the first EditedMediaItem.

PiperOrigin-RevId: 512082659

PiperOrigin-RevId: 512079471

This is consistent with the code behaviour.

PiperOrigin-RevId: 512073465

Also remove @WorkerThread annotations, as static checks associated with
this annotation aren't useful in this part of the codebase because
almost no methods are called on the main thread.

This change should be a no-op.

PiperOrigin-RevId: 512060367

We need to use this class in muxer's robolectric and instrumentation tests, hence moving it to test-util module.

PiperOrigin-RevId: 512047605

Currently if releasing a shader program throws we don't release the GL
context, which could leak resources, and any errors are silently dropped
as we suppress notifications during releasing.

Improve resource cleanup and debuggability of errors from custom effects
by continuing to release shaders on failure (for runtime and
`VideoFrameProcessingException`s) and always clean up the GL context.

Note: this doesn't help with the case where releasing a custom shader
blocks for a long time, causing releasing the frame processor to
time out.
PiperOrigin-RevId: 512042501

PiperOrigin-RevId: 512038052

Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.

Issue: google/ExoPlayer#10970

#minor-release

PiperOrigin-RevId: 512020154

PiperOrigin-RevId: 512012099

Throw when the output has a video track but the current MediaItem in
the sequence doesn't have any video.

PiperOrigin-RevId: 512004463

PiperOrigin-RevId: 511853003

PiperOrigin-RevId: 511810757

Add format codec info, which can make test skipping checks more similar to the
actual Transformer decoder checks.

Also for the test file, the actual format was 720p, but somehow the file name and
media metadata indicated 1080p. This format mismatch led to some decoding errors,
so fix the format (and associated errors). This also allows us to remove the
exception catch in ForceInterpretHdrVideoAsSdrTest, which was included due to
errors from the incorrect format.

PiperOrigin-RevId: 511809507

The current logic uses manual array operations to keep track of pending
changes. Modernize this code by using an ArrayDeque and a data class.
This also allows to extend the output stream information in the future.

This also fixes a bug where a position reset accidentally assigns a pending
stream offset instead of keeping the current one.

#minor-release

PiperOrigin-RevId: 511787571

PiperOrigin-RevId: 511778088