SDK / exoplayer

PiperOrigin-RevId: 480349627

#inlineme

PiperOrigin-RevId: 480189473

We currently use the literal -1 (=NO_VALUE) when adding up the
total. Tracks without known bitrate can be ignored in the
calculation, but we should use an explicit value of 0.

#minor-release

Issue: google/ExoPlayer#10664
PiperOrigin-RevId: 480048126

If the sample type is Dolby Vision and the display does not support Dolby Vision, then the capabilities DecoderSupport flag is set to DECODER_SUPPORT_FALLBACK_MIMETYPE. This denotes that the renderer will use a decoder for a fallback mimetype if possible. This alters track selection as tracks with DecoderSupport DECODER_SUPPORT_PRIMARY are preferred.

UnitTests included
-DefaultTrackSelector test that checks track selection reordering with DECODER_SUPPORT_FALLBACK_MIMETYPE
-MediaCodecVideoRenderer test that checks setting of DecoderSupport flag based on Display's Dolby Vision support

Issue: google/ExoPlayer#8944
PiperOrigin-RevId: 480040876

Currently, a frame is dropped if it's requested release time is in the past.
This mode was added to support previewing. However, in normal ExoPlayer
playback, slightly late frames (<30ms late) are also rendered. On MediaCodec
side, this means calling `releaseOutputBuffer` with a release time in the
past.

PiperOrigin-RevId: 479615291

PiperOrigin-RevId: 479579252

Also, update tests to allow AnyOf error codes, and no longer check exception messages, which caused quite a bit of churn.

PiperOrigin-RevId: 479570861

PiperOrigin-RevId: 479569806

This mode is supported by using `C.TIME_UNSET` (which is a negative value). The
new logic decouples the value of `C.TIME_UNSET` and the frame dropping
behaviour.

PiperOrigin-RevId: 479368880

* Add `setOutputStreamOffsetUs(long)` method in `AudioSink`.
* Add private methods `setOutputStreamOffsetUs(long)` method in `MediaCodecRenderer` and `DecoderAudioRenderer`.
* Add protected method `onOutputStreamOffsetUs(long)` method in `MediaCodecRenderer`, in which:
  * `MediaCodecRenderer` itself will be no-op for this method.
  * `MediaCodecAudioRenderer` will propagate this value to its `audioSink`.
* Add logics in `DecoderAudioRenderer` to calculate `outputStreamOffsetUs`.

PiperOrigin-RevId: 479265429

The JavaDoc of RequestMetadata should point to the media3 controller,
not the platform one.

PiperOrigin-RevId: 479047924

Currently `FrameProcessor.releaseOutputFrame()` method supports

Release at a specific system time
Drops the frame
This API is not that convenient to use when the caller wants to release a frame, now, regardless of the release time. A use case is to release (present) a frame when no frame is shown for a while, and it's thus better to just release the frame, now.

Currently if MCVR wants a frame to be rendered now, MCVR calls release frame with a set offset like 10us: `releaseOutputFrame(System.nanoTime() + 10_000)`. The 10us offset is to prevent the frame processor dropping the frame, due to thread hopping delays.

To make the API better usable, consider adding a mode for releasing the frame now, like (bold marks the new mode)

- Use C.TIME_UNSET to drop
- **Use -1 to release the frame immediately, or**
- Use an actual release time.

PiperOrigin-RevId: 479044215

PiperOrigin-RevId: 479003655

A follow up to stopping speaker playback with a Player decorator from
https://github.com/androidx/media/issues/15.

It looks like we will need to change to using playback suppression to avoid
errors like https://github.com/androidx/media/issues/167, when we don't start
a foreground service.

We may not have this implemented by 1.0, but would like it in the API and it seems to be appropriate.

PiperOrigin-RevId: 478835686

Assert that tone mapping is applied when an HDR edit cannot be HDR, but is successfully tone mapped. Meanwhile, assert that fallback, which is applied after codec configuration (which throws the "Tone-mapping requested but not supported by the decoder" error) is not applied when that error is called.

PiperOrigin-RevId: 478762951

PiperOrigin-RevId: 478510687

PiperOrigin-RevId: 478019046

"Final" was likely added to reference the FinalMatrixTextureProcessorWrapper,
which is a package-private class. However, I think more clear to express that
this is the input size, which then has all effects applied, to get the output
size.

PiperOrigin-RevId: 477975358

Per go/java-practices/imports#static

No functional changes intended.

PiperOrigin-RevId: 477974779

Rename test files to avoid substrings that can be implied by the directory name,
like "Transformation" and "Test"

No functional changes. Renaming-only.

PiperOrigin-RevId: 477724724

PiperOrigin-RevId: 477524540

For tone mapping error messages.

PiperOrigin-RevId: 477447799

Also, add checks for output file color.

PiperOrigin-RevId: 477439139

#minor-release

PiperOrigin-RevId: 477432256

PiperOrigin-RevId: 477166507

PiperOrigin-RevId: 476937845

PiperOrigin-RevId: 476909855

Comment-only change.

PiperOrigin-RevId: 476873286

This allows to access the associated functionality of AudioTrack and
fills a feature gap to MediaPlayer, which has a similar method.

Issue: androidx/media#135
PiperOrigin-RevId: 476398964

PiperOrigin-RevId: 476390089

* Before this CL, the texture was stored during the construction of the LUT processor. This failed since if one creates a list of GlEffects on the application thread, the texture will get stored in the application thread during the effect creation and not on the GL thread, which executes the FrameProcessors.
* This is an issue since the executing thread then can't index from the texture stored on a different thread.

PiperOrigin-RevId: 476388021

PiperOrigin-RevId: 476376463

PiperOrigin-RevId: 476373520

#minor-release

PiperOrigin-RevId: 476366214

PiperOrigin-RevId: 476362571

If the sample type is dolby vision and the following conditions match
a)There is a supported alternative codec mimetype
b)Display does not support Dolby Vision
Then getDecoderInfos will return the alternative types.

Issue: google/ExoPlayer#9794
PiperOrigin-RevId: 476356223

To confirm that tone mapping did or did not happen.

PiperOrigin-RevId: 476354606

PiperOrigin-RevId: 476144167

* Transform the intermediate color space to linear SDR by applying the SMPTE 170M EOTF and OETF.
* Use linear colors for the color filter pixel tests and update all golden bitmaps.

PiperOrigin-RevId: 476124592

The ClearKey CDM will attach an 'invalid' URL in `KeyRequest` objects,
when the documentation states this should be an empty string if a
default URL is not known.

#minor-release

PiperOrigin-RevId: 476113513